Follow DIY Superstore on social media to stay updated on the latest specials, products and news
Available in store
ABE Super Laykold is a rubberised bitumen emulsion, which is used together with ABE Membrane to provide a liquid waterproofing system. Super laykold is koi fish friendly, an all-in-one system with no need for separate primers and it has excellent adhesion and is tough, flexible and non-toxic. ABE Super Laykold is supplied by DIY Superstore in 1L, 5L and 20L containers.
Download Technical Datasheet for ABE Super Laykold
ABE Super Laykold is a rubberised bitumen emulsion waterproofing system. The waterproofing/flashing system will be super laykold, a single-pack, elastic, rubberised bitumen compound applied in accordance with the recommendations of DIY Superstore, including ABE membrane and a protective coating of ABE Silvakote where necessary. – Watch our Super Laykold product video
If you require more information about the specifications of DIY Superstore’s ABE products, Contact us today. Get your ABE Super Laykold from DIY Superstore the leading Paint Supplier in Bloemfontein.
DIY Superstore is an official Distributor for ABE products and is well-positioned to distribute the ABE Product Range throughout Bloemfontein. Our fast and dynamic services and products are supported by extensive market and technical knowledge in addition to forward-thinking staff – Watch our Paint Department in action.
|
Density |
1.02 g/cm3 |
|
Colour |
Black |
|
Finish |
Matt |
|
Flash point |
None |
|
Dilution |
Water only |
|
Toxicity |
Non-toxic |
|
Volume solids |
47% |
|
Theoretical VOC |
< 0.001 g/L |
|
Consistency |
Thixotropic paste |
|
Elastic recovery (typical) |
65% |
|
Drying time @ 25 °C |
Touch dry: ± 1 hour Hard dry: ± 24 hours Full cure: ± 7 days |
| Uses: | Super Laykold is recommended in various areas: • Flashings • Parapet walls • Flat roof waterproofing areas • Sealing joints, laps and roofing screws on corrugated roofs • May be used in areas of total water immersion |
|---|---|
| Advantages: | • Super Laykold is an all-in-one system. There is no need for separate primers (apart from metal surfaces). • It has excellent adhesion and is tough, flexible and non-toxic. • Suitable for use in potable water conditions. • Ideal for use in koi ponds. |
| Surface Preparation: | All surfaces to be clean, dry, sound, free from all laitance, fungal growth, grease, oil or loose and flaking particles. |
| Bonding / Priming: | All surfaces (except metal): Mix one part super laykold with one part clean water and prime the total area to be covered. As a guide 0.25 L of diluted primer will cover 1 m2. Allow to dry. |
| Protection on Completion: | Allow the system to dry for 7 – 10 days and then overcoat exposed area with silvakote. |
| Mixing: | Stir well before use. |
| Coverage: | 2.1 L/m2 – full system. |
| Application: | (1) First coat (all surfaces after priming): Brush or roll on a thick coat (0.75 L/m2) and embed the abe® membrane well into the wet coating. On flat surfaces, it is recommended to use a fluted aluminium roller for this purpose. Membrane overlaps should be a minimum of 100 mm on end laps and 75 mm on side laps. (2) Second coat: When the first coat has dried sufficiently to take working traffic (2 – 3 hours), apply a second coat of super laykold (0.75 L/m2) to ensure the membrane is completely saturated, and allow to dry. (3) Third coat: Apply a final coat of super laykold (0.6 L/m2) to give a smooth finish. • Note: If super laykold is used in a koi pond or dam, allow to dry for 14 days. Flush with clean water before filling. |
| Packaging: | DIY Superstore supplies ABE Super Laykold in 1 L, 5 L and 20 L containers. |
| Handling & Storage: | This product has a shelf life of 12 months if kept in a dry cool place in the original packaging. In more extreme conditions this period might be shortened. |
Reviews
There are no reviews yet.